A bi-monthly news publication for AWI Manufacturing & Supplier Members July 15, 2010
Learning Forum

AWI National / Empire State Chapter Summer Seminars Coming This Month

Registered yet? The next round of AWI Professional Development Seminars will take place in the Albany, NY area, July 30-31, 2010. Intimate delivery for immediate need – the sessions are designed to be small and interactive. Take away useful knowledge and tools for improving operations immediately.

The AWI Empire State Chapter will host sessions for estimators and project managers in the area. Limited space is available; register today if you haven’t already! Check out the agenda here for more details about the "Fundamentals of Estimating" and "Fundamentals of Project Management" sessions. What could be more vital to the success of your business than these fundamental tasks?

Send your new employees to learn the basics.
Send novice managers to fine-tune fundamental knowledge and skills.

Participants will be certain to improve their skills, increase efficiency, refresh their minds and recharge their batteries. Building your foundation with knowledge can increase your firm’s ability to compete in the crowded marketplace. Click here to register.
[Return to top]   [Print this article]

58th AWI Annual Convention, October 27-29, 2010

 

This is the most important, business building
event you can experience this year.


If you work all year long taking care of your customers, employees and suppliers and come up short taking care of your own needs, this is the time and place for you and your family: Three days in Denver, starting October 27.

Complete information on how to register, including special rates at the convention hotel—The Westin Tabor Center—are on the AWI Web site , as well as options to register now and pay now or pay later.


[Return to top]   [Print this article]

The Secrets Are in the Numbers

A Conversation with Marc Sanderson, Wilkie Sanderson

"If you are your organization’s CFO, would you fire yourself?" Learn the secrets of success that only financial trends reveal.

If you answer "yes" then you should attend two interactive sessions that Marc Sanderson, President and Owner of Wilkie Sanderson, will conduct on "The Cost of Doing Business," October 29 during the 2010 AWI Annual Convention in Denver. If you answer "no," then you should attend the session anyway. Regardless, you will take away "knowledge and action steps" you can put to use immediately, Sanderson said.

"In these economic times, if you don’t understand the numbers, you won’t have the tools to survive," Marc Sanderson of Wilkie Sanderson told AWI e-briefs. "In our industry, management tends to focus on controlling costs on the plant floor," he said. Sanderson singled out the Chief Financial Officer as a critical member of the management team, a craftsman who can examine a company’s financial reports and apply them to every aspect of operations.

During the upcoming AWI seminar sessions Sanderson plans to review the numbers in the 2010 AWI Cost of Doing Business Survey and Compensation Study Report and offer recommendations for attendees to turn their numbers into action. "Comparing your financials to the benchmark numbers in the CODBS Report is not enough," Sanderson said. "Turning the numbers into action items is the secret to cost-efficient business management and profitable growth," he said. Here’s his plan for the seminar sessions:

Step 1: Attendees will look at the CODBS Report benchmark numbers.
Step 2: Sanderson will explain how they can compare their financials to the benchmark numbers and industry averages in the Report.
Step 3: Sanderson and attendees will discuss what to do about favorable and unfavorable comparisons.

Sanderson will help attendees understand annual trends, the major benchmarks on which to focus, and the best way to view EBIT (earnings before interest and tax) and EBITDA (earnings before interest, tax, deprecation and amortization) – indicators of a company’s profitability.

The interactive format will include a lively question and answer forum and discussions among attendees. "I won’t be delivering a traditional PowerPoint presentation monologue," Sanderson said.

Maximize your participation at the two AWI CODB sessions. Bring your financials and accountant and CFO guidance. Click here to register. 


Learn More...

 Friday, October 29, 2010 – 9:00am – 10:00am

The Cost of Doing Business
Part 1: AWI’s CODB Survey Overview and Implications

Marc Sanderson, Owner and President of Wilkie Sanderson, an architectural woodwork manufacturing firm, has spent the last thirteen years steering Wilkie Sanderson from a small business to a professionally-managed strategic firm consisting of one plant with 100 employees and 65,000 square feet. Marc believes that you cannot run a successful business without facts and trend data found in AWI’s Cost of Doing Business Report Metrics. This workshop will highlight the results and practical uses of AWI’s 2010 Cost of Doing Business Survey & Compensation Study Report.

 

Friday, October 29, 2010 – 10:15am – 11:15am

The Cost of Doing Business
Part 2: Using AWI’s CODB Survey for Financial Planning

AWI’s Cost of Doing Business Survey (CODBS) delivers metrics in the 2010 report that provide important benchmarks for architectural woodworkers navigating their businesses through current and near-term turbulent times. Marc Sanderson, Owner and President of Wilkie Sanderson, uses the AWI metrics at every employee meeting to compare his firm’s performance throughout the year with industry averages. That way they stay on target, monitoring and responding to trends to remain profitable according to their strategic plan. This workshop will focus on using the CODBS metrics as the anchor for your firm’s financial planning.

 


[Return to top]   [Print this article]

Fall AWI Professional Development Seminars Scheduled

Could your experienced estimators and project managers use some "advanced" training? AWI is offering professional development seminars, September 10-11, 2010 in St. Louis, MO, to advance your managers’ knowledge and skills to the next level to seize opportunities for business when the economic recovery swings into full gear.

Learn more about "Advanced Project Management" and "Advanced Estimating," both two-day programs among AWI’s highly regarded education programs for managers. Registration is open. Sign up early – space is limited.



[Return to top]   [Print this article]

Virginia Tech Workshop for Rough Mill Yield Improvement

Virginia Tech and Virginia Cooperative Extension in conjunction with the USDA Forest Service's Wood Education and Resource Center (WERC) will host a workshop on "Rough Mill Yield Improvement Using ROMI 3.1" on November 8, 2010 at the Wood Education and Resource Center (WERC) in Princeton, WV from 8:00 am to 3:00 pm.

The "Rough Mill Yield Improvement Using ROMI 3.1" workshop is designed to help rough mill managers, supervisors, and operators to improve the performance of their rough mill, achieve reliable quality and deliveries, and decrease costs.

Workshop participants will learn how to use the power of the USDA Forest Service's ROMI 3.1 rough mill simulation tool to assess improvement scenarios. Participants also will learn about the new least-cost lumber grade-mix solver function embedded in ROMI 3.1. The least-cost lumber grade-mix solver allows mills to find the lumber grade mix satisfying their cutting bills at the least cost. The solver is especially helpful in times like now when lumber prices fluctuate heavily and the purchasing needs have to be optimized on a regular basis.

Personnel from Virginia Tech and the USDA Forest Service will help workshop participants install, set-up, and run simulations looking at issues in their own rough mill. Participants are asked to bring their own laptops so that the installed copy of the ROMI 3.1 software can be brought home and be used again. Copies of the ROMI 3.1 will be distributed free of charge.

For more information on the "Rough Mill Yield Improvement Using ROMI 3.1" workshop, contact Urs Buehlmann, Virginia Cooperative Extension at the Department of Wood Science and Forest Products at 540.231.9759, ubuehlm@vt.edu

The Department of Wood Science and Forest Products in the College of Natural Resources at Virginia Tech is the leading program in North America engaged in wood and renewable materials utilization.
[Return to top]   [Print this article]

Business Tools

Cost of Doing Business Webinar & Report: Your Future Lies in the Numbers

How do your financials and bottom line look for weathering the brutal business environment in 2009? The tata for the 2010 AWI Annual Cost of Doing Business Survey (CODBS) reveals the vital trend data you need for developing effective financial strategies. As an exclusive benefit for CODBS Member participants only, AWI will host a free one hour Webinar presented by Marc Sanderson, Owner and President of Wilkie Sanderson, on August 5 at 11:00 am EDT. Take a deeper look at the numbers.

The 2010 AWI Cost of Doing Business and Compensation Study Report will be distributed the last week of July to AWI Manufacturing Members who participated in the survey. Watch for your copy in the mail.

All other AWI Manufacturing Members will receive the Executive Summary, and non-participating AWI membership may purchase the report for $500. Visit the "Members Only" section of the AWI Web site, www.awinet.org, for a copy of the Executive Summary.

Don’t miss the Webinar for an opportunity to see what the numbers show and what they mean to individual member companies.  Marc Sanderson, President of Wilkie Sanderson, will be the Webinar presenter. He’s a firm believer and practitioner of putting the CODBS trend data to work.

All 2010 CODBS participants should mark their calendar for the complimentary AWI Webinar, Thursday, August 5th at 11:00 am EDT.  To register, click here.
[Return to top]   [Print this article]

August 1: Deadline for AWI AOE Submissions

Looking for potential new customers? Need a reason to stay in touch with your past and present customers. Tell them you earned an AWI "Award of Excellence" (AOE). How do you start the process?

Submit your application for the next "Award of Excellence" honors program – fall 2010. The deadline is August 1st.

Use an AOE award to market your excellence and gain a competitive edge during these challenging times when others are seeking entry into your markets. All Manufacturing Members are eligible to participate. Gain exposure among the outstanding projects of AWI Manufacturing Members who are featured in Design Solutions Magazine, AWI’s official quarterly journal.

Visit awinet.org for submission forms. The deadline for submissions for the next quarterly (fall) AOE honors program is August 1, 2010. Benefits to AOE honorees include exposure in the online issue of Design Solutions Magazine which is open for business 24/7, plus distribution to more than 25,000 industry professionals.

Pictured is one of the award-winning AWI Manufacturing Member projects featured in a recent AWI "Award of Excellence" quarterly competition. Inter Ocean Cabinet Company of Elmhurst, IL, fabricated and installed quarter sliced Walnut wall panels, doors, trim work and reception desk, along with high pressure decorative laminate casework and solid surface counter tops for Pfingsten Partners’ Chicago headquarters shown here. Other views of this project can be seen in the spring issue of Design Solutions.

Photo Credit: Steve Hall, Hedrich Blessing, Chicago, IL
[Return to top]   [Print this article]

Differentiating Your Business from the Competition

Do you really listen to your customers, an article in Woodworking Network asked.

That can make a difference in differentiating your business from most others, Rick Hill, the author wrote. Click here (free subscription) to learn some of the potential ways to make your business stand out from the rest.
[Return to top]   [Print this article]

AWI News

Several AWI LinkedIn Discussions Taking Place

Learn, Share, Connect! Join in.

Click into the forums anytime to find out what’s important among architectural woodworkers. Click into the latest discussion about PowerPoint presentations here. You can also see the comments of others. Get LinkedIn and receive notices of new discussions. Current postings relate to job positions available; PowerPoint presentations; e-learning; solid oak project spec challenges; and more.

If you’re not yet registered with LinkedIn, do it when you check out the article. It’s free and it’s a useful networking tool among AWI members.
[Return to top]   [Print this article]

New AWI Members

Another nine members joined AWI recently. Find out who they are how to contact them.

MANUFACTURING
Arbor Wood Products, Kansas City, KS 
Colecraft Commercial Furnishings, Falconer, NY, www.colecraftcf.com
Kramer Furniture and Cabinet Makers, Inc., Edinburgh, IN
Premier Mouldings, Harrisonburg, VA, www.valleybuildingsupply.com
Quality Custom Woodwork, Inc., Pueblo, CO
R.E.D. Construction, Inc., DBA 3V Company, Houston, TX, www.3vcompany.com
Riverside Woodworking, Inc., Springbay, IL
Schulist's Custom Cabinets, Inc., Stevens Point, WI, www.schulistcc.com

SUPPLIER
Hardware Resources, Bossier City, LA, www.hardwareresources.com

Use the online Directory of AWI Manufacturing and Supplier Members at www.awinet.org for contact information and access to the Web sites of these and other AWI members. The resource is open 24/7 for use in seeking manufacturers and suppliers of architectural woodwork. Web sites are listed for those new members whose membership applications listed the information.
[Return to top]   [Print this article]

Industry News

Save on General Registration & Technical Session Fees for IWF

Discounted registration fees are in effect for IWF 2010, August 25-28, 2010 in Atlanta, but after July 23 the fees go up. And, a new technical session fee offer has gone into effect for IWF symposiums and technical sessions. Take advantage.

General Registration
If you register before July 23, 2010, the cost is $20 per badge and the badge is good for all four days of the show. AWI members, however, receive a bigger discount – an additional $5 discount off the price. Click here to take advantage of this offer.

After the July 23, 2010 early registration deadline, the cost is $25 per badge.

Technical Session Registration
IWF is offering additional savings for attendees who register for IWF’s four symposiums and 23 technical sessions.

* Register for any symposium, and receive a free technical session registration of your choice. 
* Register for any technical session and receive a second session at half price!   

Click to register or add a symposium or session to your registration.

AWI Reception at IWF
Mark your calendar for Thursday, August 26 from 5:00 pm to 7:00 pm when AWI will host a reception for members attending IWF. The reception will take place in room A404/05 at the Georgia World Congress Center. Share your discoveries and thoughts about the show and the industry with current and prospective AWI members.

AWI Booth at IWF
Stop by Booth #1573 at IWF to meet AWI staff, other members and prospects.


[Return to top]   [Print this article]

Construction Unemployment Decreases in June

Total payroll employment declined by 125,000 in June, and the unemployment rate edged down to 9.5 percent, according to the U.S. Bureau of Labor Statistics. Construction employment decreased by 22,000 in June.

The decline in overall payroll employment reflected a decrease (-225,000) in the number of temporary employees working on Census 2010. Private-sector payroll employment edged up by 83,000.

In the construction employment sector, the largest decline occurred in nonresidential specialty trade contracting. On net, construction employment has shown little change over the last 4 months, according to BLS.
[Return to top]   [Print this article]

Multifamily Construction Continued Decline, but Growth Is Ahead

While multifamily construction spending still continues to decline, the good news is that single-family construction is advancing slowly.

The combination of the now expired home buyer tax credit, historically low interest rates and the improving employment picture has propelled single-family construction forward over the past 12 months as measured by the value of construction put in place, according to the National Association of Home Builders (NAHB).

Although the value of single-family construction only rose 0.8% at a seasonally adjusted annual rate in May, it was still up 32.1% from a year earlier — when construction activity was at an extremely low level, NAHB reported.

Unfortunately, the slowdown in multifamily construction spending continued in May, falling 6.3% from April and plummeting 57.7% from a year earlier, reflecting the cumulative effects of the lack of financing for new projects and the gradual tapering off of multifamily construction starts since fall 2009.

May starts and permit numbers were up and if that improvement continues, the NAHB predicts that the value of multifamily construction put in place will be on an upward trajectory in the next few months.
[Return to top]   [Print this article]

DHI Joins ConsensusDOCS Coalition

The Door and Hardware Institute (DHI) has joined the ConsensusDOCS coalition, which creates standard contract documents for use by all participants in the construction industry.

"DHI’s base of more than 5,000 professional members representing contract door and hardware distributors, manufacturers, and independent sales agents across the U.S., Canada and abroad," according to a ConcensusDocs release.

DHI joins 23 other leading construction industry associations in support of the ConsensusDOCS contract documents.

ConsensusDOCS contracts are the first and only industry standard contracts written and endorsed by 24 leading construction organizations. Offering a catalog of more than 90 contract documents covering all methods of project delivery, ConsensusDOCS contracts incorporate fair risk allocation and best practices to represent the project’s best interests. Endorsing organizations represent Designers, Owners, Contractors, Subcontractors, and Sureties (DOCS). For more information or to download excerpted samples, please visit www.ConsensusDOCS.org.
[Return to top]   [Print this article]

Safety Matters

Hundreds Participate in OSHA Combustible Dust Meeting

The Occupational Safety and Health Administration (OSHA) held its first virtual stakeholder meeting June 28 to seek input about combustible dust workplace hazards. More than 400 people participated in the live event and more than 100 others have read the archived chat online since then.

During the one hour event, OSHA published 160 comments to the chat window and provided 58 responses. Go to the Combustible Dust Web Chat page to read the comments and responses. OSHA will monitor the site, provide additional information and pose follow-up questions when appropriate.
[Return to top]   [Print this article]

Green Scene

Fourth Certified Wood Benchmark Comment Period Closed

Prior to the deadline for comments on the Certified Wood Standard proposed by the U.S. Green Building Council, the Forest Stewardship Council submitted their comments. There is a lot at stake among competing certification bodies. See what the FSC submitted.

In an open letter, FSC-US President Corey Brinkema wrote, "A strong rebuke of the proposed weakening of the MRc7 Certified Wood credit is needed now." See the Open Letter here.
[Return to top]   [Print this article]

FSC Launches Revised U.S. Forest Management Standard

The United States national office of the Forest Stewardship Council (FSC–US) recently announced the launch of the revised FSC-US Forest Management Standard for forest operations in the contiguous U.S.

The revised standard has been approved by FSC International which requires all accredited forest management standards based on its 10 Principles and 56 Criteria to undergo a review and consider necessary revision every five years.

According to FSC, the revised U.S. Standard marks the end of a three year review and revision process concentrating on the myriad environmental, social, and economic values associated with forests and forest products. The revised standard harmonizes nine regional standards into one national standard to reduce complexity and improve efficiencies in the management and auditing process. Regional variation is maintained in key areas of forest management and conservation where local conditions, including forest types and ecological processes, warrant different management techniques.

FSC governance and procedures for standards and policy-setting are founded on stakeholder collaboration and transparency.

The new standard retains key environmental, social, and economic concepts from the regional standards, but improves consistency and clarity in application, FSC announced. The distinguishing hallmarks of FSC certification remain intact in the revision, including old growth protection, restrictions on conversion and clearcuts, restrictions on chemical use, and consultation with community groups, and protection of indigenous people’s rights, FSC reported.

The Family Forest Indicators are designed to reflect that certain FSC criteria (such as the capacity for forest management to affect local economies, larger social conditions, and large scale ecological processes) may not apply to family forests individually. Additionally, the certification procedures take into account the potential cumulative impacts of multiple family forests in close proximity on these same issues. In some cases new indicators have been developed to address conditions unique to small ownerships, according to FSC.

The revised standard is available for use immediately and all forests seeking FSC-certification but not currently FSC-certified should be evaluated to this revised standard. Those forests that are currently FSC-certified will have until October 8, 2011 to be in conformance to this standard. 

For more information, visit the FSC Web site to see what is new.
[Return to top]   [Print this article]

Standards

AWS Errata Web Site Check for Latest Changes

The AWI Technical Committee reminds members about Errata published – and changing continually – for the Architectural Woodwork Standards. See the latest changes.

AWI members are reminded that the Errata List is a living document and should be checked frequently for changes in the AWS. Don’t be caught using outdated information on your next project that specifies the AWS.

Many changes have been made since October 1, 2009 following publication of the First Edition of the AWS in August 2009. The Errata Web site is the ultimate source of information which is posted as AWS data changes.

Visit http://www.aws-errata.com/ for errors and corrections to the Architectural Woodwork Standards (AWS) jointly produced and published by the three developers: AWI, the Woodwork Manufacturers Association of Canada (AWMAC) and the Woodwork Institute (WI).
[Return to top]   [Print this article]

Member News

Fall NexGen Dates, Educational Seminars Announced

The NexGen Event continues with this unique cooperation as competitors, coined "coop-etition." This fall’s NexGen, the second one this year, will be held October 5-7, 2010 in North Carolina.

The NexGen Event enables the participating companies to cost-effectively showcase their products within their own facilities. Each facility will feature their latest machinery in operation and experts will be on hand to answer questions. Participating AWI Supplier Members are: Biesse America; Costa & Grissom Machinery Company, Inc.; Delmac Machinery Group; Holz-Her U.S., Inc.; and Stiles Machinery.

The three-day event includes the addition of an evening educational session and reception in each of major cities of the participating companies. Tuesday evening will be in High Point, Wednesday in Mooresville and Thursday in Charlotte. Topics and speakers are still being finalized.

For more information, visit www.nexgenevent.com. The site provides details about the event, the participating companies, and related travel information. Questions? Contact the NexGen Event committee at info@nexgenevent.com or call 866.285.1958.
[Return to top]   [Print this article]

Federal Scene

Formaldehyde Emission Legislation Signed into Law

The U.S. Congress has approved legislation (S. 1660), signed into law on July 7, 2010 by President Obama, that limits the allowable emissions of formaldehyde from specific composite wood products, hardwood plywood, particleboard and medium-density fiberboard sold in the United States.

The Formaldehyde Standards for Composite Woods Products Act amends the 1976 Toxic Substances Control Act by requiring the U.S. Environmental Protection Agency (EPA) to implement formaldehyde emission standards originally established by the California Air Resources Board (CARB) by 2013.

The new federal law restricts formaldehyde emissions from composite wood products sold, supplied, or manufactured in the U.S., including those imported from foreign countries. "The result will be the toughest production standard in the world, including provisions to ensure that products made with composite wood panels meet the standing," said the Composite Panel Association (CPA).

Although the regulations put the national emissions standards in place as early as July of 2011 and 2012, the EPA has an additional two and a half years – until January 2013 – to promulgate regulations to implement the standards and retailers will be allowed to "sell-through" their inventory beyond that date. Other sources of formaldehyde other than its use in building products are not addressed by the legislation, according to the Hardwood Plywood and Veneer Association (HPVA).

There is a labeling option in the federal legislation for indicating "no-added formaldehyde-base binder." Over half of the hardwood plywood manufactured in North America uses these types of resin systems and about 60% of the North American produced hardwood plywood is exempt from the lowest emission standards of the panel products regulated by this new federal law, HPVA noted.

EPA’s implementing regulations will ensure compliance equivalent to compliance with the California standing, including its provisions relating to labeling, chain of custody requirements, sell-through provisions, ultra-low-emitting formaldehyde resins, no-added formaldehyde resins, finished goods, third-party testing and certification, auditing and reporting of third-party certifiers, record-keeping and enforcement, as well as import regulations.

To view the final text of the "Enrolled" bill, visit http://thomas.loc.gov and search on the bill number, S. 1660. The measure, which was signed into law as Public Law No.111-199 is not available for viewing on the Government Printing Office Web site as AWI e-briefs goes too press.
[Return to top]   [Print this article]

Compliance Delayed for Renovation, Repair & Painting Rule

The Environmental Protection Agency is granting contractors and workers additional time to obtain necessary training and certifications to comply with the Renovation, Repair and Painting Rule. The current law addresses most pre-1978 housing, and child-care facilities and schools.

Acknowledging the difficulties experienced in obtaining the required certification and renovation worker training by the previous deadline of April 23, 2010, the new EPA guidelines are:

  • Until October 1, 2010, EPA will not take enforcement action for violations of the RRP Rules certification requirement. 
  • EPA will not enforce against individual renovation workers if the person has applied to, or has enrolled in, a certified renovator class by September 30, 2010. Renovators must complete the training by December 31, 2010.

To see a copy of EPA’s guidance memo, click here. For a list of training providers, click here.

Meanwhile, a coalition of housing groups led by the National Association of Home Builders (NAHB) has formed to sue the EPA over the "op-out" provision, which expired on July 6. NAHB pointed out that the Lead Renovation, Repair and Painting Rule now applies to all homes built before 1978, in effect making "the regulation apply to homes where no small children – the target of the rule – even live." According to Nation’s Building News (free subscription), "the group challenged the EPA’s action on the grounds that the agency substantially amended its lead paint rule without considering any new scientific data and before it was even put into place in April."

WDMA estimates that compliance with the rule will add $60 to $170 per window opening on a typical professionally installed retrofit project," according to a report in Woodworking Network (free subscription). Added prep time and material costs reportedly increase the installation costs.

[Return to top]   [Print this article]

$30 Billion Small Business Lending Fund Includes Construction Loans

Relief may be in sight for small businesses seeking loans. The House of Representatives passed H.R. 5297, the Small Business Lending Fund Act of 2010, which includes an amendment giving builders the same access as other small businesses to loans from a $30 billion program the legislation creates.

The National Association of Home Builders supported the amendment and lobbied aggressively for its inclusion just before the measure passed the House on a vote of 418 to three. The NAHB said the legislation doesn’t resolve the credit crunch, but is a step forward to end the construction lending crisis.

The Senate has not yet addressed the measure. To view H.R. 5297 click here and enter the bill number in the "Search" box.
[Return to top]   [Print this article]

IRS Requests Public Input on Expanded Information Reporting Requirement

The Internal Revenue Service (IRS) is inviting public comment on how to most effectively carry out a law change that, starting in 2012, will require businesses to report a wider range of payments to contractors, vendors and others, usually on Form 1099.

These comments will help the IRS issue guidance that implements this provision in a manner that minimizes burden and avoids duplicate reporting, the agency reported.

Under a proposed regulation, many business purchases made with credit or debit cards would be exempt from the new reporting requirement because they are already reported by banks and other payment processors. The IRS seeks comments on additional circumstances in which duplicate reporting might otherwise occur and on rules that would prevent such duplicate reporting.

The change, enacted in March but not effective until 2012, expanded existing reporting requirements to include a business’s payments related to goods and other property, and payments to most corporations. With some exceptions, payments to corporations are currently exempt from this requirement.

You may submit comments by e-mail to: Notice.Comments@irscounsel.treas.gov. Include "Notice 2010-51" in the subject line. The deadline is September 29, 2010.
[Return to top]   [Print this article]

Chapter News

AWI Arizona Chapter President

Carlos Castillo, President of the AWI Arizona Chapter President, is establishing a new company.

He was formerly associated with Stiles Machinery. Stay tuned for more information.
[Return to top]   [Print this article]

AWI Chicago Chapter & Members Host Veneer Presentation

Members of the AWI Chicago Chapter hosted "A Peer into Veneer & Suitable Substrates" presentation for RTKL Architects, a national firm with offices in several U.S. locations, including Chicago. Aetna Plywood, a local AWI material supplier, and Great Lakes Wood Products co-sponsored the event on July 13 at RTKL’s Michigan Avenue offices.

Kevin Forestall provided live pieces of veneer for demonstration during the presentation. "The program is an excellent example of outreach to the design community," said AWI Executive Vice President Phil Duvic.

 

Left to right: John Chlebek of Aetna Plywood; Greg Bednar, AWI; Kevin Forestall, Great Lakes Wood Products; and Mike Roper, Aetna Plywood delivered an interactive presentation about veneer and substrates that generated a lively discussion among participants.


 
[Return to top]   [Print this article]

Upcoming Chapter Events

What’s happening in your local AWI chapters and architectural woodwork communities?

Check out the informative AWI chapter programs sponsored in your area. Tap into your local AWI chapter for vital information that can help your business grow and put you in touch with fellow AWI architectural woodworkers and suppliers.

AWI Ohio Valley Chapter
When: July 16, 2010 (8:00 am) 
What: Golf Outing
Where: Legendary Run Golf Course, Cincinnati, OH
Information & Registration:  See attached
Questions: Contact Chapter Officers  

AWI Carolinas Chapter
When: July 16, 2010 (9:30 am)
What: Tour of Sherwin-Williams Greensboro, NC facility
Host: Sherwin-Williams
Where: 113 Stage Coach Trail, Greensboro, NC
Information & RSVP: Contact Kristine Cox at 336.887.0700 x24 (p)

AWI New England Chapter
When: July 22, 2010 (2:00 – 6:00 pm)
What: AutoCAD Training, Session Two (Creating and Inserting Blocks; Orthogonal Drawing; Creating a Millwork Detail; Layout Space & Plotting)
Presenter: Joe Fiorello, Author of CAD for Interiors Basics and CAD for Interiors beyond the Basics
Where: Porter and Chester Institute, Canton, MW
Registration: $50; tye.waller@neawi.org
Questions: Jfiorello@fadstudios.com
 

AWI Georgia Chapter
When: July 23, 2010
What: Chapter Meeting with Sherwin-Williams & LEED® Finishes
Special Guest: AWI National President-Elect Robert Stout, RLS Commercial Interiors, Inc.
Information: Contact Chapter Officers 

AWI Iowa-Nebraska Chapter
When: July 23, 2010
What: Chapter Meeting & Summer Social
Where: Honey Creek / Sailing Social
Special Guest: AWI National President Doug Carney, R&S Casework, Inc.
Information: Contact Chapter Officers  

AWI New England Chapter
When: July 26, 2010
What: Annual NEAWI Summer Outijng — Golf & Fishing, Reception & Dinner
Where: Wentworth by the Sea & Fishing, Newburyport, MA
Information: See attached
Questions: Tye Waller at tye.waller@neawi.org
 

AWI Empire State Chapter
When: July 30-31, 2010
What: 2010 Summer AWI Professional Development Seminars
Program Host: AWI Empire State Chapter
Where: Albany, NY area
Information: See attached 
Registration: Click here (deadline is July 23, 2010)
Questions: Ilaria Buffalo at ibuffalo@awinet.org
; 571.323.3614 (p) 

AWI Great Lakes Chapter
When: August 19-21, 2010
What: Summer Event (Opening reception, plant tours - Strata Design and Thomas & Milliken, wine tasting, boat cruise)
Program Sponsors: AWI National, AWI Great Lakes Chapter, Strata Design, JB Cutting, Lumbermen's Inc., JKL Machinery, and Stiles Machinery
Where: Park Place Hotel, Traverse City, MI
Information: Click here
Questions: Debra Behring at dbehring@jbcutting.com
; 586.468.4765 (p) 

All chapters are encouraged to plan their events early to allow for ample promotion of your activities in this section of AWI e-briefs as well as through other avenues. Contact Greg Bednar, AWI Chapter Development Services at gbednar@awinet.org

Members are encouraged to check chapter event listings in the most recent issue of AWI e-briefs, as well as with chapter officers and chapter Web sites for program changes. As plans become finalized, dates and presentations may change for chapter programs previously listed. This issue of AWI e-briefs contains the most current information available to AWI National.

[Return to top]   [Print this article]

Next Issue of E-briefs

The next issue of AWI e-briefs will be published August 5, 2010.


[Return to top]   [Print this article]



Founded in 1953, AWI is a nonprofit organization representing over 3,500 manufacturers, suppliers, and design professionals in the architectural woodwork industry.

AWI Mission:
The authoritative resource for excellence in architectural woodwork.

Copyright Architectural Woodwork Institute www.awinet.org


AWI SPONSORS

Click on each of the sponsor logos below to visit their web sites!
Get better acquainted with these AWI Supplier Members and generous supporters of AWI.


SUSTAINING SPONSOR





MAJOR SPONSORS






CNA



Lamin Art



VaneerTech



LEVEL 2 SPONSORS














LEVEL 3 SPONSOR

valspar



LEVEL 4 SPONSORS









DELMAC



Sherwin-Williams



Biesse America



UPCOMING

IWFAtlanta
August 25-28, 2010
Atlanta, GA
Early IWF Registation
Ends July 23, 2010

AWI Summer Professional
Development Seminars
July 30-31, 2010
Registration Open! 
SPACE LIMITED 

"LEED® - Green /
Sustainable Woodwork"
AWI Presentation at IWF
August 26, 1:00 - 2:30 pm
Click here for IWF
Education Track Details

AWI Fall
Professional
Development
Sept. 10 – 11, 2010
St. Louis, MO
Registration Open!
SPACE LIMITED

58th AWI Annual Convention
Oct. 27-30, 2010
Denver, CO
Registration Open
With Early Bird Specials!
www.awinet.org

___________________

Leverage the AWS!
Build Business Partnerships

Presentations Available
for Chapters, Architects,
Woodworkers

Request a speaker/program
at www.awispeaker.org

AWI Speakers Bureau 

AWI - a Recognized
Provider
AIA Learning Units

Call AWI Headquarters
at 571.323.3636 for
updated
AWI - AIA Form B 2007

_________________

AWI Help Line!
Contact
help@awinet.org,
a dedicated e-mail
address to assure
timely response
to your requests for
technical assistance.

_______________

AWI Store
Your Resource for
Architectural Woodwork
Products & Publications
Click here to shop now!

_______________

Update Your AWI
Contact Information
Keep your connection
to AWI current.  Make
certain that you receive
all e-communications
and subscriptions. 
Whenever your contact
information changes,
login to
www.awinet.org
and update your
information or e-mail
Cassey Gibson, AWI
Membership Manager.

_______________
 

Member Company
News

AWI and members
want to know about
your company’s
personnel changes,
business expansion,
awards, education
programs, "green"
business practices
and certifications,
and more. Send news
and press releases to
AWI Marketing Director
Katie Allen.

Check the AWI Web site
for AWI Member Company
News.
  Click here.

_________________


 

 

The in-kind donations by AWI to the SkillsUSA National Leadership & Skills Conference have earned it the status of official sponsorship.  As the organizer and developer of the national SkillsUSA Cabinetmaking Competition, AWI plays an impressive role in the entire contest process. 

____________________

Leverage Connections.
Use AWI Networking Tools!


Find AWI on Facebook! 

Join the AWI network
of 600 contacts on
LinkedIn.
 
_________________

Cautionary Disclaimer

The Architectural Woodwork Institute (AWI) makes every effort to ensure that published information is accurate and current. Neither AWI, nor any content contributor, officer, or employee of AWI warrants the accuracy, reliability or timeliness of any information published in AWI News-Briefs and/or AWI e-briefs, nor endorses any products, services or other information resources linked from AWI’s editorial content and shall not be held liable for any losses caused by reliance on the accuracy, reliability or timeliness of such information. Portions of the information may be incorrect or not current. Any person or entity that relies on any information obtained from this system does so at their own risk.